How To Configure Rockspace AC1200 Extender

Do you have any experience configuring a Rockspace AC1200 WiFi extender? You don’t have to worry if you said “NO.” We’re here to help. You will discover how to set up a Rockspace AC1200 in this article. Let’s start,

What Is An AC1200 Rockspace Extender?

A Rockspace AC1200 extender works on the 2.4GHz and 5GHz dual-band. Up to 20 devices, including speakers, laptops, cameras, desktops, tablets, and smartphones, can be connected once the WiFi range has been booted. Connect your WiFi devices to the internet to enjoy 4K video streaming, music, multiplayer gaming, etc. You can benefit from a speed of up to 1200 Mbps in this.

Advantages Of The Rockspace AC1200 Extender

  • This WiFi extender extends WiFi coverage throughout the entire home network.
  • Your WiFi router’s range is increased by up to 1200 square feet.
  • Any WiFi router is compatible with the Rockspace AC1200 WiFi extender.
  • Additionally, it links wired devices to WiFi.

The Most Important Conditions For Rockspace AC1200

  • The most essential requirement is that you must have one power adapter and a Rockspace AC1200 extender.
  • Using these tools, you can log in to or set up a Rockspace extender.
  • The Rockspace AC1200 extender must be connected to the PC using a single ethernet wire.
  • There are several other alternatives, including WiFi.
  • The appropriate form of connection for your home scenario may rely on you.

The Rockspace AC1200 Extender Login Process

  • First, insert the Rockspace AC1200 extender’s plug into the power outlet. Turn on your extender after that.
  • Connect the extender to one end of the ethernet cable, and the router to the other.
  • After that, open your preferred web browser.
  • Search for the web address and you are now entering the Rockspace website.
  • Pick the wired range extender option after entering, then hit the next button.
  • You can therefore generate and set an admin WiFi password for the Rockspace repeater.

Setup Instructions For The Rockspace AC1200 Extender

The greatest solution for poor signal strength in homes and offices is a Rockspace WiFi repeater. Not only is it simple to set up, but it’s also simple to keep up with. You have come to the right place if you are seeking a Rockspace AC1200 setup.

In the Rockspace AC1200 repeater, there are three LED lights.

Power LED

  1. The Rockspace extender is powered on when the power LED is solid.
  2. The extender is booting up when the LED light on the extender begins to blink.
  3. Your extender is not turned on when the extender’s LED power light is off.


  1. When the repeater and router successfully connect, the WPS LED light turns on.
  2. The repeater and router connection begins when the WPS LED light begins to blink.
  3. The WPS function is deactivated when the WPS LED light is off.

Signal LED

  1. Your Rockspace repeater is perfectly positioned if the LED light is solid blue.
  2. When the repeater is far from the router, a solid red LED light will show this.
  3. The extender’s LED signal light will be off if it can’t connect to the host router.

In How Many Ways Do You Attach Your Extender To Your Router?

There are two straightforward ways to link your Rockspace device to the router:

  1. Using WEB UI
  2. WPS Button

WEB UI Connection For Extender To Router

  • The extender’s plug must first be inserted into a power outlet located closer to the router.
  • Connect your device to the “Rockspace EXT” extended WiFi network at this point.
  • In the web browser’s address bar, type re.rockspace.local.
  • Create a login password right now for upcoming tries.
  • Choose the WiFi network that you want to expand now.
  • Then, enter the password for the WiFi network you wish to expand.
  • Finally, let the repeater and router take a few minutes to connect before proceeding.

Note: You can use a different way to connect the extender to the router if you can’t configure the extender.

Through The WPS Button

You can easily set up your Rockspace AC1200 extender using this way.

Note: You must first determine whether or not your router is compatible with the WPS function. If not, save your time by moving on to the next step and skipping this one:

  • Use the WPS button on your router or your repeater within the next two minutes.
  • Now, both the repeater and router have solid blue LED lighting.
  • It follows that your two devices have successfully connected.

Tip: After the Rockspace AC1200 setup process if you are facing any errors then check the frequency of your Rockspace gadget:

Modify Your WiFi’s Band Frequency

Bands can be of two different types. The 5GHz band is the first, while the 2.4GHz band is the second. We will now describe how the two bands differ from one another. Switch your device from the 2.4GHz frequency to the 5GHz band if your Rockspace wireless extender is dual-band or tri-band.

Many smart home appliances use the slower 2.4GHz range. However, you can use the 5GHz band, which is faster than the 2.4 GHz band, to connect devices like smartphones, LED TVs, laptops, and speakers. If you are unsure how to determine the WiFi band you are using, visit re.rockspace.local to determine the band.

We hope after reading this page you can easily do your Rockspace AC1200 setup. But if you are facing any other error then discuss it with us.

Leave a Comment

Your email address will not be published. Required fields are marked *